Installer Resources - Air-Source Heat Pumps

MassCEC provides incentives for the installation of air-source heat pump (ASHP) heating systems at residential, commercial, and public facilities. This page provides resources for ASHP installers (and VRF designers) about the process of applying for ASHP and VRF awards.

  • residential ASHP project is any project at a single residential unit.
  • small-scale ASHP project has a heating capacity of up to 240,000 BTU/hr or up to 20 single-head units.* 
  • commercial-scale ASHP project has a heating capacity over 240,000 BTU/hr or more than 20 single-head units.*
  • A variable refrigerant flow (VRF) project is always considered commercial-scale for the purposes of MassCEC programs, including qualifying single-family VRF systems.

*Effective February 1, 2019, all non-VRF applications will be submitted under the small-scale program, with awards capped at $25,000.


Residential and Small-Scale

  • Program Manual: Contains information on how to apply, technical requirements, mandatory certifications, and grant structure. Installers must read this document before participating in the program.
  • Primary Installer Agreement: Must be submitted with proof of training once by each Primary Installer in order to participate in the Program. See sample proof of training.


APPLICATION PORTAL RESOURCES

HELPFUL LINKS AND RESOURCES

Qualifying Products List: Resource detailing eligible equipment and corresponding rebate values. This list displays rebate levels effective November 1, 2018. *This list does not include VRF equipment.

Commercial-Scale ASHP/VRF

PROGRAM DOCUMENTS (In effect through January 31, 2019)

  • Program Manual: Contains information on how to apply, technical requirements, mandatory certifications, and grant structure. Designers and installers must read this document before participating in the program.
  • Primary Designer/Installer Agreement: Must be submitted once for the Program by each Primary Designer (for VRF) and Primary Installer (for both VRF and Mini-Splits).
  • VRF Application Form: Must be submitted with supporting documentation, as described Program Manual. Designers/installers are encouraged to complete the form on behalf of system owners
  • Mini-Splits Application Form: Must be submitted with supporting documentation, as described in Program Manual.
  • Project Narrative: Supplements the Application Form. Not required for projects installing less than 240,000 BTU/hr of heating capacity.
  • System Owner’s Agreement: Must be signed by the System Owner for each Project.

PROGRAM DOCUMENTS (In effect after February 1, 2019)

  • Program Manual: Contains information on how to apply, technical requirements, mandatory certifications, and grant structure. Designers and installers must read this document before participating in the program.
  • Primary Designer/Installer Agreement: Must be submitted once by each Primary Designer and Primary Installer.
  • VRF Application Form: Must be submitted with supporting documentation for each Project, as described Program Manual. Designers/installers are encouraged to complete the form on behalf of system owners
  • Project Narrative: Supplements the Application Form. Not required for projects installing less than 240,000 BTU/hr of heating capacity.
  • System Owner’s Agreement: Must be signed by the System Owner for each Project.

NEW! SAMPLE APPLICATION

  1. Sample VRF Application
  2. Sample Project Narrative *only required for projects installing more than 240,000 BTU/hr of total capacity.
  3. Sample System Owner Agreement
  4. Sample Load Calculation Summary
  5. Sample Design Summary
  6. Sample AHRI Sheets
  7. Sample Electric Bill *if new construction, may be submitted as part of milestone 2.
  8. Sample Primary Designer Materials
  9. Sample Primary Installer Materials


HELPFUL LINKS AND RESOURCES


Code of Conduct

All installers who participate in MassCEC's rebate programs are bound by MassCEC's Code of Conduct


Best Practices

MassCEC’s program requirements are intended to ensure high-quality project designs and installations. We recommend double-checking the following to make sure the system meets program requirements and to minimize the delays associated with these common installation and application errors.


How to Avoid Common Installation Errors:

  • Ensure the outdoor condenser is mounted securely and sits above the snow line.
  • Ensure the outdoor rated wire is not a Type NM-B cable. NEC Article 334.12(B)(4) prohibits the use of NM cable in wet locations, and Article 300.9 defines the interior of an outdoor raceway as a wet location.
  • Ensure the indoor and outdoor units power wire connection meets Article 110.14 in the MA Amendments of the NEC which states, “Connection by means of wire binding screws or studs and nuts having upturned lugs or equivalent shall be permitted or 10 AWG or smaller solid conductors. Where stranded conductors are terminated on and not looped through such terminals, the terminals shall be identified for such use, or the strands at the terminals shall be made solid.”
  • Ensure the ampacity of the circuit breaker connection follows the ASHP manufacturer's requirements.
  • Ensure that the refrigerant charge is correct based on the line set length and that the line set is purged, pressure tested, and evacuated per the manufacturer's instructions.

 

Contact Us

Feel free to email us at ASHP@masscec.com for residential projects, VRF@masscec.com for commercial projects, or call 617-315-9357. Please note that Residential and Small-Scale ASHP applications submitted starting on November 1, 2018, must be submitted through MassCEC's online Application Portal.